powered by
Discussions
Photos
Products
Ideabooks
Discussions
Professionals
Users
Need Help- Where or how can I have the crown molding made
Damian Disterdick
January 10, 2013 in Design Dilemma
I would like to find out how to make a mold of this crown in order to reproduce it.

I have looked on the internet but can not find any information as to how to make a mold like this. I have also tried to locate already manufactured crown molding to match but have found nothing even close to this design.

I need 50 linear feet. It seems that the original, 1914, was in sections so I can take down a section to make the molding.

Any help would be greatly appreciated.
Damian
Thank you for reporting this comment. Undo
PRO
Scott Design, Inc.
I suggest a latex mold based on what I have seen plasterers do. I don't have first hand knowledge as to what materials they use but I came upon this website. http://www.artmolds.com/category24.cfm. EnvironMolds' Latex Mold Making Rubber

I suggest you contact the customer service department with questions and they can inform you of techniques, classes, videos etc as well as how to handle their products. Good luck
0 Likes   January 10, 2013 at 6:43PM
Thank you for reporting this comment. Undo
PRO
AFC inc
Mold is very expensive because materials and very time consuming to make it .
There is no sense to make mold much easier to buy molding .
You can check architectural suppliers on Internet .
The pattern looks like common.
0 Likes   January 10, 2013 at 11:16PM
Thank you for reporting this comment. Undo
lanaelaine
I purchased something similar at home depot and just painted it. Tedious but not difficult
0 Likes   January 10, 2013 at 11:30PM
Thank you for reporting this comment. Undo
PRO
Deborah Butler, Brickwood Builders
Is the existing a plaster moulding or is it wood? If plaster, call in a plaster expert and they can duplicate. If wood, contact a local millwork shop and they can recreate the moulding. The setup fee is pretty pricey.
0 Likes   January 11, 2013 at 4:38AM
Thank you for reporting this comment. Undo
PRO
Olde World Walls & Ceilings, Inc
Damian,

We can help you with this, if you would like. Please visit our web site www.oldeworldwallsinc.com

You can see in our pictures how we make molds if you would like to tackle this yourself or we can work with you to create it and do the install.

Please let us know if we can help you.

Randy
1 Like   January 15, 2013 at 5:43AM
Thank you for reporting this comment. Undo
Damian Disterdick
Thank you all for your input. I have a bit more information to go with.
When I do complete this I will post it on my page.
0 Likes   January 21, 2013 at 12:46PM
Thank you for reporting this comment. Undo
Damian Disterdick
lanaelaine,
I find i tvery hard to believe that Home Depot carries this type of 1914 molding.
I would really like to know which Home Depot you purchased this molding at.
0 Likes   January 21, 2013 at 12:52PM
Thank you for reporting this comment. Undo
Damian Disterdick
I enjoyed the dog photographs that everyone did. I think there should also be a cat one. I am starting right now. Wilhelmina loves painting on ladders. Bella love sinks before and even after installation.
1 Like   April 16, 2013 at 9:54PM
Sign Up to comment
The content on this page is provided by Houzz and is subject to the Houzz terms of use, copyright and privacy policy.
Copyright claims: contact the Houzz designated agent.