powered by
Discussions
Photos
Products
Ideabooks
Discussions
Professionals
Users
Plain flat drawer pull to glue a 4 in glass tile
Holly Glaser
February 27, 2013 in Design Dilemma
So
My cabinet has no pulls and I want to make pulls using 4 x1/2 in glass tile.

Where can I find plain flat metal drawer pulls that will support a tile well and be invisible once the pull is installed ?
I want to make pulls from glass the same color as where the dish overlaps the granite.
The picture of the tub surround shows blue tiles on horizontal surfaces and mosaic on walls.
The floor is 16x16 dark slate with charchol grout
Help, I want my bathroom back
Two pictures.
Granite sample and blue green dish
The vanity pic gets the pulls
Holly
Thank you for reporting this comment. Undo
J LV
Is this the finished cabinet? I have purchased several pulls and knobs from pullsdirect.com and internob.com they have a wide assortment that you cannot find at the hardware store. I would suggest a simple wood pull paint it with either spray paint or regular paint then the tile will adhere to the wood much better than metal. As indicted above you might be able to find what you are after on either of these websites.
Hope this helps good luck!!
February 27, 2013 at 1:12PM     
Thank you for reporting this comment. Undo
PRO
Holly Glaser
Thanks for replying.
Yes, that is the finished cabinet.
I'm checking out pulls direct right now, Thanks
February 27, 2013 at 2:38PM     
Thank you for reporting this comment. Undo
PRO
Holly Glaser
Wow, thanks again.
February 27, 2013 at 2:44PM   
Thank you for reporting this comment. Undo
PRO
A Crew of Two
anthropolgie.com
February 27, 2013 at 3:01PM     
Sign Up to comment
Related Discussions
Beveled glass in cabinets or flat plain glass?
I will have quite a bit of glass cabinets in my white...
Help! How to glue glass tile to polished porcelain?
My contractor tiled the shampoo niche with the same...
Where do i purchase the drawer pulls from they look very flat
The drawer pull they look flat where do i get them...
What size drawer pulls 3,4, or 5".
What size and did you use the same size on all drawers?...
I need 4" drawer pulls,
the drilled holes are 4" apart on the drawer front...
More Discussions
Need help with kitchen backsplash
We are building a new house and I am not able to decide...
Please help with master bedroom on a BUDGET!
I posted na week or so ago but think in my post was...
How to decorate this neutral master bedroom?
This is our 19x19 new master bedroom. Apart from the...
"Need decor advice for new home"
I have a clean slate to create a polished casual open-concept...
People viewed this after searching for:
The content on this page is provided by Houzz and is subject to the Houzz terms of use, copyright and privacy policy.
Copyright claims: contact the Houzz designated agent.